Flexible Rubber Expansion Joints
FOB Price: | US$10.00 / Piece |
---|---|
Min. Order: | 5 Pieces |
Min. Order | FOB Price |
---|---|
5 Pieces | US$10.00/ Piece |
Payment Terms: | L/C, T/T |
---|
Product Description
Company Info
Product Description
Size: DN20-DN1200
Standard: DIN2576, ANSI150LB, BS4504, JIS
Rubber material: EPDM, NBR, NR, NEOPRENE
Flange material: Q235 Galanized
Rubber Expansion joint, Rubber Flexible Joint, Rubber bellow
Certificate: ISO9001, CE, SGS
Type: With control rod, without control rod
Bellow Type: Single sphere, double sphere
End: Flanges
Working pressure: 0.35MPa-1.4Mpa
Working temperature: 80Deg-110 Deg
Bursting Pressure: 3.0-4.8Mpa
Flanges standatd: ANSI, JIS, BS, DN
Bellow materials: EPDM, Neopresne,
Nature rubber, Nitrile, Hypalon
Usage: The rubber joints have been supplied to every aspect of industry and builing, They are designed to compensate for axial, lateral, angular movements and vibrations in piping systems and equipment, which operate at varying conditions of pressure and temperature.
Packing: Cartons then in poly-wooden cases.
Payment: LC. DP. TT
Pressure/Temp Correction Factor
Material List : | |||||||||||||||
No. | Name | Material | |||||||||||||
1) | Inner rubber lining | IIR,CR,EPDM,NR,NBR | |||||||||||||
2) | Outer rubber lining | IIR,CR,EPDM,NR,NBR | |||||||||||||
3) | Casing ply | Polyester cord fabric | |||||||||||||
4) | Flange | Q235A,stainless steel | |||||||||||||
5) | Strengthening ring | Q235A | |||||||||||||
6) | Stopper | Q235A,stainless steel | |||||||||||||
7) | Limit bar | Q235A,35#,stainless steel | |||||||||||||
8) | Nut | Q235A,35#,stainless steel | |||||||||||||
4. Physical and Mechanical Properties of Rubber Expansion Joint : | |||||||||||||||
No. | Item | index | Measured value | ||||||||||||
Inner/outer rubber lining | |||||||||||||||
1) | Tensile strength (Mpa) | ≥12 | 13.5 | ||||||||||||
2) | Tensile yield (%) | ≥450 | 560 | ||||||||||||
3) | Tension set at break (%) | ≤25 | 20 | ||||||||||||
4) | Hardness (Shore A hardness) | 60±5 | 60 | ||||||||||||
5) | Brittleness temperature (°C) | ≤-30 | -40 | ||||||||||||
6) | Cohesive strength (between cord fabric) (KN/m) | ≥2.0 | 4.8 | ||||||||||||
7) | 100°Cx48h Hot air aging | Rate of Tensile Strength Reduction | ≤25 | 15 | |||||||||||
Rate of Ultimate Elongation Reduction | ≤30 | 20 | |||||||||||||
8) | Mass change (10%H2SO4*Room temperature) % | ≤3 | 2 | ||||||||||||
9) | Mass change (10%H2SO4*Room temperature) % | ≤3 | 2 | ||||||||||||
5. Technical Parameters for Double Sphere Flexible Rubber Joint : | |||||||||||||||
DN Diameter | FF Length (mm) | Axis displacement | Radial displacement | Deflexion displacement | |||||||||||
Type-I | Type-II | Type-I | Type-II | Type-I | Type-II | ||||||||||
mm | inch | Extension | Compression | Extension | Compression | ||||||||||
32 | 1¼″ | 90 | 6 | 10 | 9 | ±7.5° | |||||||||
40 | 1½″ | 95 | 7 | 10 | 9 | ±7.5° | |||||||||
50 | 2″ | 105 | 7 | 10 | 10 | ±7.5° | |||||||||
65 | 2½″ | 115 | 7 | 13 | 11 | ±7.5° | |||||||||
80 | 3″ | 135 | 8 | 15 | 12 | ±7.5° | |||||||||
100 | 4″ | 150 | 10 | 19 | 13 | ±7.5° | |||||||||
125 | 5″ | 165 | 12 | 19 | 13 | ±7.5° | |||||||||
150 | 6″ | 180 | 12 | 20 | 14 | ±7.5° | |||||||||
200 | 8″ | 210 | 16 | 25 | 30 | 35 | 22 | 25 | ±7.5° | ±10° | |||||
250 | 10″ | 230 | 16 | 25 | 30 | 40 | 22 | 25 | ±7.5° | ±12° | |||||
300 | 12″ | 245 | 16 | 25 | 30 | 40 | 22 | 25 | ±7.5° | ±12° | |||||
350 | 14″ | 255 | 16 | 25 | 35 | 45 | 22 | 30 | ±7.5° | ±12° | |||||
400 | 16″ | 255 | 16 | 25 | 35 | 45 | 22 | 30 | ±7.5° | ±12° | |||||
450 | 18″ | 255 | 16 | 25 | 36 | 47 | 22 | 30 | ±7.5° | ±12° | |||||
500 | 20″ | 255 | 16 | 25 | 36 | 48 | 22 | 30 | ±7.5° | ±12° | |||||
600 | 24″ | 260 | 16 | 25 | 40 | 50 | 22 | 33 | ±7.5° | ±12° | |||||
700 | 28″ | 260 | 16 | 25 | 40 | 55 | 22 | 33 | ±7.5° | ±12° | |||||
750 | 30″ | 260 | 40 | 55 | 33 | ±12° | |||||||||
800 | 32″ | 260 | 16 | 25 | 45 | 55 | 22 | ±7.5° | ±12° | ||||||
900 | 36″ | 260 | 16 | 25 | 45 | 55 | 22 | 35 | ±7.5° | ±12° | |||||
1000 | 40″ | 260 | 16 | 25 | 45 | 60 | 22 | 35 | ±7.5° | ±12° | |||||
1100 | 44″ | 300 | 45 | 60 | 35 | ±7.5° | ±12° | ||||||||
1200 | 48″ | 300 | 16 | 25 | 50 | 60 | 24 | 38 | ±7.5° | ±10° | |||||
1300 | 52″ | 300 | 50 | 60 | 38 | ±10° | |||||||||
1400 | 56″ | 350 | 50 | 70 | 40 | ±10° | |||||||||
1500 | 60″ | 350 | 60 | 70 | 40 | ±10° | |||||||||
1600 | 64″ | 350 | 18 | 25 | 60 | 70 | 24 | 46 | ±7.5° | ±10° | |||||
1800 | 72″ | 400 | 18 | 25 | 60 | 75 | 24 | 48 | ±7.5° | ±10° | |||||
2000 | 80″ | 450 | 70 | 75 | 50 | ±10° | |||||||||
2200 | 80″ | 400 | 70 | 75 | 50 | ±10° | |||||||||
2200 | 88″ | 500 | 70 | 80 | 60 | ±10° | |||||||||
2400 | 96″ | 500 | 80 | 80 | 60 | ±10° | |||||||||
2600 | 104″ | 500 | 85 | 80 | 60 | ±10° | |||||||||
2800 | 112″ | 550 | 85 | 80 | 60 | ±10° | |||||||||
3000 | 120″ | 550 | 85 | 80 | 60 | ±10° |
Address:
Changzhou Road No. 277, Pingdu, Qingdao, Shandong
Business Type:
Manufacturer/Factory
Business Range:
Construction & Decoration, Industrial Equipment & Components, Instruments & Meters, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Our company, Qingdao Judibode trading CO. Ltd. Is a large and professional manufacturing company.
Our main products are as below:
1, Ductile iron pipe fitting according to EN545/ISO2531/ANSI AWWA C110/153 from DN50 to DN2000
2, Ductile iron pipe joint, include but not limited to Universal couplings, universal flange adaptor, Gibault joint for PVC pipe, Quick flange adaptor for PVC/PE pipe, Saddle for PVC pipe, Universal saddle with SS band., Flange adaptor and coupling for PE/PVC pipe, dismantling joint, repair clamp, expansion joint etc. All of them are according to EN545/ISO2531/AWWA and PN10/PN16/PN25/PN40/ANSI B16.5 Class 125/150
3, Ductile iron valves, include but not limit to gate valve, check valve, angle valve, air release valve, hydraulic control valve etc.
For surface treatment, beside Epoxy Resin power coated, Nylon coated also available.
Our market: Europe, USA, Middle-east, Africa and South-America.
5; Our capacity: 500tons/month.
We are most professional supplier in China for ductile iron pipe joint(coupling, flange adaptor, dismantling joint, gibault joint, saddle clamp, repair clamp etc) and OEM pipe joint, and we are the only one who produce them on auto production line in China. Then our price is much lower and quality is better for higher pressure. And surface is more smooth and beautiful.
Welcome all clients come to check our foundry, we will do our best to support.
Our main products are as below:
1, Ductile iron pipe fitting according to EN545/ISO2531/ANSI AWWA C110/153 from DN50 to DN2000
2, Ductile iron pipe joint, include but not limited to Universal couplings, universal flange adaptor, Gibault joint for PVC pipe, Quick flange adaptor for PVC/PE pipe, Saddle for PVC pipe, Universal saddle with SS band., Flange adaptor and coupling for PE/PVC pipe, dismantling joint, repair clamp, expansion joint etc. All of them are according to EN545/ISO2531/AWWA and PN10/PN16/PN25/PN40/ANSI B16.5 Class 125/150
3, Ductile iron valves, include but not limit to gate valve, check valve, angle valve, air release valve, hydraulic control valve etc.
For surface treatment, beside Epoxy Resin power coated, Nylon coated also available.
Our market: Europe, USA, Middle-east, Africa and South-America.
5; Our capacity: 500tons/month.
We are most professional supplier in China for ductile iron pipe joint(coupling, flange adaptor, dismantling joint, gibault joint, saddle clamp, repair clamp etc) and OEM pipe joint, and we are the only one who produce them on auto production line in China. Then our price is much lower and quality is better for higher pressure. And surface is more smooth and beautiful.
Welcome all clients come to check our foundry, we will do our best to support.